Napędy indukcyjno-dynamiczne łączników prądu stałego współpracujące z komorami próżniowymi prądu przemiennego
Abstract
W monografii przedstawiono sposób dobrania parametrów wchodzących w skład próżniowego członu łączeniowego z napędem indukcyjno-dynamicznym, stosowanego jako główny element łączeniowy w łącznikach wykorzystujących technologię próżniową. Głównym zagadnieniem była współpraca NID z komorami prądu przemiennego mogącymi brać czynny udział w wyłączaniu obwodów prądu stałego. Badania te skoncentrowane były nie tylko na samym napędzie NID, ale przede wszystkim na jego współpracy z pozostałymi elementami ww. członów łączeniowych. Uzyskane wyniki stanowią zbiór uwag i wskazówek przeznaczonych dla projektantów tego typu urządzeń. The monograph presents the method of selecting parameters of the vacuum contact
unit (VCU) consisting of an inductive-dynamic drive (IDD), used as the main
components in switches based on vacuum technology. The main issue was the
cooperation of IDD with alternating current interrupters that can actively participate in
switching off direct current. These studies were focused not only on the IDD drive, but
also on its cooperation with other elements of the above-mentioned VCU elements. The
obtained results and guidelines are intended for designers of this type of devices.
A multi-parameter theoretical analysis of the NID drive was carried out by
simulating the magnetic and electrical phenomena occurring in it, depending on its
design dimensions. This analysis was conducted on the basis of an axially symmetric 2D
model. The influence of the drive dimensions on the force generated by the drive was
investigated.
The paper presents the developed laboratory stand with the use of the high-speed
camera Photron APX, where it was possible to measure displacements and analyze the
nature of the movement of the VCU components, as well as to measure the opening time.
The cooperation of drives with AC interrupters for 600 A and 1250 A was checked.